There is a saying in the industry that "a car is repaired, not broken." Although this sentence is a bit extreme, it is also reasonable, because in actual use, some models have indeed been repaired due to some minor faults. It has caused a major failure of the vehicle, and in order to avoid this phenomenon, it is necessary to strictly abide by the maintenance regulations and related standard values.

Motorcycle engines are relatively simple in structure, but in the process of engine maintenance, if you do not pay attention to details, it is easy to have poor maintenance quality and reduced power after oil leakage.

The main reason for this phenomenon is directly related to the following.

1. Professional tools, the engine is a powertrain composed of many parts. In many cases, due to the lack of special tools during the maintenance process, the corresponding parts will be displaced. This displacement phenomenon is almost invisible to the naked eye. Continue to assemble in this state, then the effect of later use can be imagined.

2. Standard value, under normal circumstances, each screw of the engine has its standard torque, but in fact, during the maintenance process, it is basically operated by hand, even some professional maintenance organizations, except for specific nuts and screws. In addition, the bolt tightness will not be checked by a torque wrench, which to a certain extent paved the way for engine oil leakage.

3. Maintenance environment, the maintenance environment of motorcycles is relatively harsh, and basically they are operated outdoors. In such an environment, it is difficult to guarantee the quality of the repaired vehicle, especially the maintenance of some precision parts. Maintenance in the environment can easily cause secondary damage.

4. The quality is not good, and it is essential to replace the parts in the maintenance process, and the quality of the replaced parts directly determines the service life of the vehicle in the later period and the effect of maintenance. In terms of the quality of the accessories currently circulating in the market, only A small number of them can meet the design requirements of the manufacturer, so the substandard quality of the parts is also the main reason for the engine to be damaged more and more.

The above are the main reasons for the unsatisfactory effect of motorcycle engine maintenance. In order to improve the maintenance effect of the engine, it is necessary to standardize the operation and use high-quality parts. Otherwise, there is no way to guarantee the maintenance quality.

In order to avoid the maintenance sequelae of the engine, the simplest and most effective way is to use timely maintenance to increase the service life of the engine and avoid its failure, because there will be a series of troubles without maintenance, and according to the current motorcycle From the perspective of the quality of the car, as long as it is properly used and maintained, the probability of failure is not high, so treating the car well can avoid the adverse factors caused by maintenance.